IEC 61032 Test Probe D With 1N Built-in Force For Electrical Enclosure IP4X Safety Inspection

This test probe fully complies with the standard requirements of IEC 61032 Figure 4 Test Probe D, and satisfies the test specifications of IEC 60335-1 Clause 22.1, IEC 60529 IP4X test, IEC 60065 and other international safety standards; this thin rod probe is used to verify the protective performance of equipment against human access to internal hazardous live parts, and it can also simulate thin wire intrusion to check solid foreign object protection capability.

It supports customized functional collocation: it can be fitted with an alligator clip to conduct protection against electric contact continuity tests, and an M6 threaded hole is reserved at the tail of the handle to connect a push-pull dynamometer for enclosure forced penetration tests, where probes with the letter "T" in their model number are equipped with built-in standard test force.

This IEC standard Test Probe D SN220-4T with built-in 1N test force is a mandatory safety testing instrument widely applied in multiple industries and third-party laboratories:

• Household Appliance Industry
Comply with IEC 60335-1 safety clauses for refrigerators, washing machines, small kitchen appliances, heaters and fans, to inspect anti-shock enclosure protection performance and prevent accidental touch of internal live hazardous components.

• Automotive Electrical & EV Component Manufacturing
For vehicle control modules, charging accessories, on-board power supplies and wiring harness housings, execute IP4X solid foreign object protection test to meet automotive electronic safety certification requirements.

• Lighting & Audio-Visual Equipment Industry
Fit IEC 60065 standard for LED lamps, power adapters, televisions, speakers and multimedia devices, simulating thin metal wire intrusion to check enclosure safety clearance.

• Third-Party Testing & Certification Laboratories
Used for product compliance testing before market access, supporting calibration and inspection for export certification to Europe, Southeast Asia, Middle East and Oceania markets.

• Power & Low-Voltage Electrical Equipment Factories
Detect junction boxes, switch sockets, control cabinets and low-voltage distribution products, verifying the protection level against thin wire access to dangerous live parts.

• R&D Quality Control Labs
Support product prototype safety verification, batch incoming inspection and finished product regular quality audit, with customizable alligator clip and dynamometer connection accessories to match different lab test procedures.